Q And Z Signals | WB8YLO.NET (2024)

Operating signals, also called Q and Z codes, are used throughout the world. They are usedby both civil and military organizations. The most complete list of both Q and Z signals isfound in ACP 131(F). This is the standard guide for use by the NATO military forces.

Q signals are normally used in Morse code transmissions. Z signals are generally used onlyin military digital transmissions. We will ignore the Z signals and concentrate on the Q signals.

Q signals are three letter codes that begin with the letter ‘Q’. They range from QAA to QZZ. TheQ signals are divided up into several different sections and allocated to particular uses. Theseries QAA through QNZ are defined by the International Civil Aviation Organization for aeronauticaluse. QOA through QQZ are reserved for maritime use. The series QRA through QUZ are defined by theInternational Telecommunications Union (ITU) and are in use at virtually every civil station throughout the world.

Amateur radio has adapted some of these Q codes for use in amateur communications. These Q codescome from the ITU civil series QRA through QUZ. Most of the meanings are identical to the ITUdefinitions, however, they must be looked at in the context of amateur communications. For example,QSJ? asks what the charges are for sending the telegraph. Since amateur communications are withoutcharge, this Q code would not make sense.

Q codes are either sent with or without a question mark (CW: di-di-dah-dah-di-dit). A Qcode with a question mark is to be understood as asking a question. A Q code without aquestion mark is to be understood as an affirmative answer to a question asked or as adirect statement. For example, if you say QRA?, you are asking the question: “what is thename of your station”. If you are asked this question, you could answer: “the name of mystation is WB8AAA”. In a maritime service, you might have answered QRA Newport, meaningthat the name of your station is Newport. In the context of an amateur radio conversation,the name of your station is commonly understood to be your station callsign. Always keepin mind that radio amateurs are communicating in an amateur radio context and that Q codesshould be interpreted in that context.

Amateur radio actually has adapted two different sets of Q codes. The set in most commonuse is the Q codes From QRA through QUZ. The second set is the set of Q codes, used onlyin ARRL NTS nets, that begin with QN. These Q codes generally have no equivalent in theACP 131 publication and are specifically defined only for use in NTS nets. They are notused in casual amateur radio communications.

The Q Codes most commonly used in amateur radio communications follow.

Several of the above Q codes can have various other items ofinformation added to them depending on the context. Suchinformation might include times, dates, names, orfrequencies.

Some of the above Q codes are commonly used in ways that areslightly different than the above formal definitions. Forexample, QRL? is commonly used to mean: "Is this frequencyin use?". Remember, context matters, common usage can vary,and amateur radio is a hobby.

The following ARRL-defined QN signals are only for use onNTS CW nets. They are not for use on phone nets. Say it withwords on phone nets. Q signals followed by an '*' are foruse only by the net control station.

The above two Q code lists, along with some other important information for traffic handlers, maybe found on the ARRL web site as FSD-218.